UR Lighting

System Selection

How to Plan a 48V Track Lighting System

Plan the track layout, match fixtures to each lighting task, and check component compatibility before requesting a quote.

Linear and grille fixtures in the MINI-10 track system

Start with what needs to be lit

Mark the circulation routes, work surfaces and displays on a reflected ceiling plan. Decide where you need even general light and where a beam should draw attention to a specific surface. A retail wall and the aisle beside it may need different fixtures even if they share a track.

Draw each rail run and note the ceiling height, mounting surface and any obstructions. Mark whether you want a recessed, surface-mounted or suspended look, then check which mounting options the selected rail supports.

Choose fixtures for each run

Use the lighting task to choose between linear modules, spotlights, grille modules and pendants. Prepare a fixture schedule with the quantity, intended mounting position and target finish for each item. Where appearance matters, compare the actual fixture dimensions with the rail and surrounding ceiling details.

The UR Lighting MINI-10 catalog shows straight and curved rails alongside several fixture types. Use the relevant fixture page when specifying wattage, dimensions and finish options.

Confirm the system as a complete set

Ask the supplier to confirm the rail profile, fixture adapters, power feeds, connectors, driver and control options together. A 48V marking alone does not establish that fixtures, rails or controllers from different series are interchangeable.

If you need dimming or color control, specify what should operate together and what should be controlled independently. Have the supplier verify the selected driver, control method and permitted load against the physical layout before placing the order.

Prepare the quote package

Send a marked-up drawing and a quantity schedule. Identify anything provisional so the supplier can price the confirmed items and flag what needs review.

  • Track runs, mounting method and finish
  • Fixtures and quantities for each run
  • Power-feed locations and control zones
  • Destination market, documentation needs and delivery target
Explore the 48V MINI-10 system